SomoGear Raptar-S Rangefinder (w/VCSEL illuminator)

With a range of 5 to 999 meters, this unit combines multiple functions in one device — including a visible laser, IR laser, VCSEL-based IR illuminator, and an integrated laser rangefinder (LRF).

PRE-ORDER Now, Ship out within 20 days.
“Only 6 units available in this batch — First come, first served.”

Description

SomoGear Raptar-S Rangefinder

The SomoGear RAPTAR-S is a rangefinder unit with an integrated IR laser and IR illuminator.
Note: This model does not feature an applied ballistics solver, designed for airsoft use.

Key Features:

• Multiple Functions: Co-aligned Visible laser, IR laser & IR illuminator (VCSEL)
• Laser Rangefinder (LRF) dot CAN NOT adjustable
• Distance Display: LED segment screen shows range data in meters
• Measurement Range: 5 to 999 meters
• With Pulse Rates Programming Function
• IR Illuminator Beam: CAN NOT adjust the beam, it is Fixed angle of 5.73°, (At 30 meters, beam diameter is approximately Ø3.0 meters)
• Remote Keypad Switch: Same button layout as the main unit for intuitive control
• Remote Cable Length: 14 inches
• High Strength Polymer + Floating Fiber Housing
• Fits for Picatinny Rail MIL-STD-1913  (.835″)
• Battery: 1 x 3V CR123A (not include)
• Battery Life: >6 Hours
• This product is NOT waterproof
• Weight: 322 g / 11.35 oz
• Brand: SOMOGEAR
  

RAPTAR COMBO TECHNICAL SPECIFICATIONS

Visible Aim Laser
Output Power Low: ≤0.7mW
Output Power High: ≤4.9mW

IR Aim Laser
Output Power Low: ≤0.1mW
Output Power High: ≤0.9mW

IR Illuminator (VCSEL)
Output Power Low: ≤5mW
Output Power High: ≤35mW

***Because of the different monitor’s color, brightness, the pictures and objects will be slightly different.***

Package Include:
1 x Raptar-S Rangefinder
1 x Remote Keypad Switch

Remark:
NOT include the battery (due to airmail restricted)

=============================================

Raptar-S Rangefinder’s IR Illuminator Pulse Rates Operation Manual

In addition to momentary and continuous modes of operation, the IR illuminator may be programmed to operate in pulse mode at either 1, 2, 4, 8 pulses per second.

To access the programming mode, the mode selector must be turned to the desired pulse rate within 5 seconds of pressing the Two-dot raised button.

1. With the Mode Selector turned to the P (program) position, hold down the Two-dot raised button, orange indicator light up.
2. Turn the Mode Selector to the IR position that corresponds to the desired pulse rate as shown in Table below.
   
3. Release the Two-dot raised button, the orange indicator flashing 2 times, and the pulse rate will be programmed, the set pulse rate will remain until it is programmed differently or canceled

How to cancel the Pulse Rate? How to Stay on the illuminator beam?

• Set the rate to 0 pulse per second

WARNING:

• Do not stare into the laser beams
• Do not look into the laser beams through binoculars or telescopes
• Do not point the lasers beams at mirror-like surfaces
• Do not shine the laser beams into other individuals’ eyes